The Compatible Black Brother TN-1050 Toner Refill (TN1050 Laser Printer Refill) allows end users to refill and reuse their empty TN1050, TN-1050 toner cartridges and will significantly reduce both your printing costs and your carbon footprint - for minimal effort on your part. It is sold for the low price of £8.
The Compatible Black Brother TN-1050 Toner Refill will enable you to refill the cartridges for the following printers Brother DCP-1510, Brother DCP-1512, Brother DCP-1610W, Brother DCP-1612W, Brother DCP-1612WVB, Brother HL-1110, Brother HL-1112, Brother HL-1112A, Brother HL-1210W, Brother HL-1212W, Brother HL-1212WVB, Brother MFC-1810, Brother MFC-1910, Brother MFC-1910W. Each bottle will give you a page yield of Approx. 2,000 pages @ 5% average coverage.
Different geographic regions regions use different part numbers but the cartridges are physically the same.
| Part No | Region information |
| TN-1010 | Toner Ctg, 1500 Pgs, China/Asia# |
| TN-1020 | Toner Ctg, 1500 Pgs, India# |
| TN-1050 | Toner Ctg, 1K Pgs, Euro # |
| TN-1040 | Toner Ctg, 1K Pgs, Middle East# |
| TN-1030 | Toner Ctg, 1K Pgs, N. America# |
| TN-1070 | Toner Ctg, 1K Pgs, Oceania# |
| TN-1000 | Toner Ctg, 1K Pgs, Pacific# |
| TN-1060 | Toner Ctg, 1K Pgs, S. America # |
The Compatible Black Brother TN-1050 Toner Refill offers you a low cost and enviromentally friendly solution whilst still maintaining excellent printing performance.
Brother TN1050, Brother TN-1050 Toner, TN1050, TN1050, Toner Refill Instructions
Top tip: Reset the cartridge BEFORE refilling.
The printer will ask for the toner cartridge to be changed before all of the toner has been used. This is a waste of toner and your money. To avoid waste - put the printer into “Continue Mode” – this will force the printer to use up all of the remaining toner inside the cartridge !
To force the machine to continue printing after the LEDs indicate "Replace Toner" please follow the steps below:
HL SERIES
- Press the power button seven times to activate "Continue mode".
- All the LEDs on the printer will blink twice, and then the Ready LED () turns on).
< p>Note: Make sure that the top cover is closed before you change the mode.
When the LEDs indicate an error mode, you cannot change the mode.
DCP /MFC SERIES
- Press MENU and choose General Setup =>, Replace Toner.
- Use the UP OR DOWN ARROW key to choose Continue and then press OK
- Press STOP/EXIT
Note: Make sure that the top cover is closed before you change the mode.
When the LEDs indicate an error mode, you cannot change the mode.
For models with FAX functions
Since print quality cannot be guaranteed while in Continue Mode with Replace Toner status, when received faxes are printed, the LCD will ask if the print quality of the fax is OK.
If the print quality is not good:
Press 2 (No) and the fax will be stored to the machine's memory so that you can print it again after the toner cartridge is replaced with a new one.
If the print quality is good: Press 1 (Yes) and the LCD will ask if you want to delete the printed fax from the memory.
